ServicesWindow Retrofitting
Window Retrofitting in Corona
Retrofitting swaps out tired aluminum windows for new ones while the wall around them stays put. No stucco patching, no drywall repair, and most homes are done in a day. We look at every opening first so you know retrofit is the right fit before anything is ordered.

New windows, same sound walls
A retrofit window is built to fit inside the frame that is already in your wall. We remove the old sashes and glass, cut away the center of the old frame, and leave the outer frame and its nailing fin where they are. The new window slides into that opening, and a flush flange on the outside covers the old edge so the finished look is clean.
This is the gentler option for your home. Stucco that has held up for decades does not get cut, and the paint and trim inside stay as they are. You keep the parts of the wall that are still doing their job and replace only the part that has worn out.
Retrofit is the right call when the opening is square and dry. If we find rot, water stains or a frame that has shifted, we will tell you plainly and talk through full-frame work on our Window Installation page instead.
What a retrofit job includes
- An honest look at each opening
- We check every frame for water damage, soft wood and settling before we recommend retrofit. If one window needs more than a retrofit, you hear about it at the estimate, not on install day.
- Custom-measured windows
- Each window is ordered to the exact size of its opening. Small differences between windows that look identical are common, so we measure every one.
- Careful removal of the old sash and glass
- We take out the old glass and cut back the old frame without disturbing the stucco or the drywall around it.
- Insulated, sealed fit
- Gaps between the old and new frame are filled with insulation, and the exterior gets a continuous bead of sealant. This is the step that keeps drafts and dust out for years.
- Cleanup and haul-away
- We cover floors and furniture near each window, vacuum as we go, and take the old windows and glass with us.
Signs your windows are ready for a retrofit
Drafts around the frame
If you feel air moving near a closed window, the seals and weatherstripping have given out. Retrofit replaces them along with the window.
Sliders that stick or jump the track
Worn rollers and bent aluminum tracks make windows hard to open and hard to lock.
Fog or moisture between the panes
Cloudy glass on a dual-pane window means the seal has failed and the insulating gas is gone.
Rooms that bake in the afternoon
Single-pane glass lets summer heat pour into west-facing rooms in Corona. New low-E glass keeps those rooms noticeably cooler.
Street noise you can hear clearly
Thin single panes do little to soften traffic and neighbors. Dual-pane retrofit windows make a quiet difference.
Chalky, pitted aluminum
Old frames that look gray and rough are near the end of their life, even if the wall around them is fine.
How retrofit day works
- 1
Free in-home estimate
We come to your home, measure each opening, check the frames and go over glass and frame options with you. There is no sales pressure or obligation.
- 2
Your windows are built to size
After you sign off on the written estimate, we place the order. When the windows are ready, we call you to pick a date that fits your schedule.
- 3
Removing the old, setting the new
We cover floors and furniture, take out the old sash and the center of the old frame, then level and shim each new window into the opening that is already there.
- 4
Seal, test and tidy
We insulate and seal every gap, open, close and lock each window to make sure it runs smoothly, clean the glass, and haul away the old units.
- 5
Walk-through with you
Before we leave, we show you how the new windows work and how to keep the tracks and seals clean so they hold up for years.

What affects the cost of a retrofit
Every retrofit quote depends on what your windows need, so we price each home only after we have seen it in person. You get a written estimate before any work goes on the calendar. We do not charge for the visit, and you are welcome to think it over for as long as you like before saying yes.
- Number and size of windows
- More openings and larger panes mean more material to order and more hours on install day.
- Glass and frame choices
- Low-E coatings, tempered glass where code requires it, and frame colors each change what a single window costs.
- Window style
- Sliders and single-hung windows are the simplest to fit. Picture windows, arches and other specialty shapes need more care to order and set.
- Access and height
- Second-story openings, and windows tucked behind shrubs or above a roofline, take extra setup before work can start.
- Condition of the old frames
- When an opening needs repair before the new window goes in, we list that work as its own line on your estimate.
Window retrofitting questions
Something not covered here? (951) 631-8910
Will a retrofit window damage my stucco?
No. The point of retrofit is to leave the stucco alone. The old outer frame stays in the wall, and the new window's flange covers it from the outside, so there is no cutting or patching.
Will I lose any glass area?
A little. Because the new frame sits inside the old one, the visible glass shrinks slightly around the edges, often less than an inch. Most people do not notice once the windows are in, and we can show you a sample at the estimate.
How long does a retrofit take?
Most single windows take well under an hour once we are set up. A typical home is usually finished in a single day, depending on how many windows you are replacing and how easy they are to reach.
How do I know if I need retrofit or full-frame replacement?
If the frames are solid and dry, retrofit is usually the better value. If we find rot, water damage or a badly out-of-square opening, full-frame installation is the safer choice. We check each window and explain what we see before recommending either one.
Can I retrofit only some of my windows now?
Yes. Many people start with the rooms that get the most sun or the noisiest windows. We can match frame color and style so later windows look consistent with the first ones.

See if retrofit fits your home
We will measure your windows, check every frame and give you a written estimate you can take your time with. Free in-home estimates with no sales pressure or obligation.