ServicesWindow Installation
Window Installation in Corona
Adding a room, opening up a dark wall or enlarging a window that never let in enough light? We install new windows into new or changed openings, with the framing, flashing and sealing done so the window keeps working and the wall stays dry for years.

When window installation is the right call
Window installation is different from swapping out an old unit. It covers openings that are new or changing: a window in a room addition, a bigger opening in a living room, a new window in a bathroom or stairwell, or a window cut into a garage conversion. The wall itself gets opened, reframed and closed back up around the new unit.
That is where most long-term trouble starts or gets prevented. A window that is installed without a proper header, a sloped sill and layered flashing can look fine on day one and start leaking behind the stucco a few winters later. We build each opening so water has a way out and the frame sits square, which keeps the window operating smoothly and saves you from repairs to the wall around it.
If your existing openings are staying the same size and you just want better windows in them, our Window Replacement or Window Retrofitting pages are the better fit. We will tell you which approach suits your home during the estimate.

What our window installation includes
- 01
Measuring and layout
We check the wall for studs, wiring and plumbing before marking the opening. Sizing is set so the window fits the room and the outside of your home looks balanced.
- 02
Framing and headers
New or enlarged openings get a properly sized header and framing. A sound frame keeps the window square, so sashes slide and lock the way they should for years.
- 03
Sill pan and flashing
We install a sloped sill pan and lap the flashing in the right order, bottom to top. Any water that gets past the outer seal is directed back outside instead of into the wall.
- 04
Setting and sealing the window
The unit is shimmed level, fastened and insulated with low-expansion foam around the frame. Exterior sealant goes on last, matched to stucco or siding.
- 05
Exterior and interior finish
We patch stucco or siding around the new opening and finish the interior with trim or a drywall return. The goal is a window that looks like it was always there.
- 06
Cleanup and a walkthrough
We haul away debris, vacuum the work area and show you how the window opens, locks and should be cared for, including which weep holes to keep clear.
Questions about Window Installation?
Call(951) 631-8910Signs your home could use a new window
A room that stays dark
If you keep lights on during the day in a hallway, bathroom or bedroom, a new opening can change how the space feels and how you use it.
An addition or remodel in the works
New rooms need windows that are flashed into the new wall correctly from the start. Getting this right during construction is far easier than fixing a leak later.
A garage or patio conversion
Converted spaces often need windows for light, airflow and egress. We size them for the room and the way you plan to use it.
A bedroom window that is too small
Some older bedrooms have windows that are hard to climb through. Enlarging the opening can make the room safer and brighter.
Stuffy rooms with no cross breeze
Hot inland summers are easier when air can move through a room. A second window on another wall often makes a noticeable difference in the evenings.
How a window installation job runs
- 1
Free in-home estimate
We come out, look at the wall from inside and out, and talk through what you want from the new window. You get a clear written estimate with no sales pressure or obligation.
- 2
Permit and ordering
When the work changes the structure of a wall, we handle the permit. Your window is ordered to the exact opening size, and we schedule the install once it arrives.
- 3
Opening the wall
We protect floors and furniture, then cut and frame the opening. Most of the dusty work happens early in the day so the room can be closed up the same visit when possible.
- 4
Install, flash and seal
The window is set, flashed, insulated and sealed. We then finish the exterior and interior around it.
- 5
Inspection and walkthrough
If a permit was pulled, we meet the inspection. Before we leave, we walk you through operation and the simple upkeep that keeps the window working well.
What affects the cost of a new window
Adding a window where there was none involves more than the window itself, so the price depends on the wall and the opening as much as the product. Your written estimate breaks the job into its parts, such as framing, the window, flashing and finish work, so nothing is lumped together or left vague. If anything changes once the wall is open, we talk with you before doing extra work.
- New opening or enlarged opening
- Cutting a fresh opening in a finished wall takes more framing and patching than widening one that already exists.
- Wall type and finish
- Stucco, siding and interior drywall each need different patching. Stucco around a new opening takes extra care to blend in and seal properly.
- Window size and style
- Larger units, sliders versus casements and specialty shapes all change the product cost and the labor to set them.
- What is inside the wall
- Wiring, plumbing or ductwork in the way may need to be moved before the opening can be framed.
- Permits and access
- Structural changes usually need a permit. Second-story openings or tight side yards can also add time.
Window installation questions
How is window installation different from window replacement?
Replacement puts a new window into an opening that already exists. Installation means creating a new opening or changing the size of one, which involves framing, flashing and wall finish work. We will look at your project and tell you honestly which one it is.
Will I need a permit?
Cutting a new opening or enlarging one usually changes the wall structure, so a permit is typically required. We pull it and handle the inspection scheduling so you do not have to.
How long does it take to add a window?
Many single openings are framed, set and closed up in a day, with stucco or paint finishing sometimes needing a return visit to cure. Larger openings or several windows take longer, and we give you a realistic schedule at the estimate.
Will the new window match my other windows?
We can match the frame color, style and grid pattern of your existing windows in most cases. If your current windows are near the end of their life, we can also talk about updating them at the same time.
How do I keep a new window in good shape?
Keep the sill track and weep holes free of dirt so water can drain, wipe the tracks a few times a year, and check the exterior sealant for cracks. A little attention each season helps the window and the wall around it last a long time.

Planning a new window for your home?
Tell us about the room and the wall, and we will come look at it in person. You will get a clear written estimate and an honest take on the best way to do it.